Atlas Copco 2202932518 FLEX HOSE L890 3/4+SV60F90+F90

Atlas Copco Flexible Hose 2202932518 – L890, 3/4", SV60, F90+F90
The Atlas Copco part number 2202932518, also identified as 2202-9325-18, is listed under the technical designation FLEX.HOSE L890 3/4+SV60F90+F90. It is a flexible hose assembly intended for use as a replacement component in compatible industrial compressor installations.

The assembly is designed to connect components within the machine's designated circuit, following the original equipment configuration. Its flexible construction facilitates installation where a fixed rigid pipe would be less suitable and allows the connection to follow the required routing between components.

The nominal length and fitting arrangement are essential identification features. Selecting the correct assembly helps ensure proper alignment, connection geometry and compatibility with the existing installation.
Technical specifications
- Manufacturer reference: Atlas Copco.
- Part number: 2202932518.
- Alternative part number format: 2202-9325-18.
- Original designation: FLEX.HOSE L890 3/4+SV60F90+F90.
- Component type: flexible hose assembly with fittings.
- Nominal length: 890 mm.
- Nominal connection size: 3/4 inch.
- Fitting configuration: SV60 and F90+F90, as indicated by the original designation.
- Application: replacement and maintenance of compatible compressor installations.
The part number and original product designation are supported by published spare parts listings. 

ATLAS COPCO ORIGINAL HOSE - BOAO

Function and intended applications
This flexible hose assembly is intended to provide a connection between components within the designated compressor circuit. Correct identification is essential because the hose length, fitting arrangement and angular orientation must match the original equipment specifications.

Replacing a worn, damaged or unsuitable hose with the correct assembly helps restore the intended connection and supports reliable equipment maintenance.

Typical maintenance applications include:
- Replacement of an existing flexible hose assembly.
- Restoration of a damaged or deteriorated connection.
- Scheduled servicing of compatible industrial compressor equipment.
- Maintenance operations requiring the original hose length and fitting arrangement.
The exact circuit and compatible compressor models should be confirmed using the machine's serial number and the manufacturer's spare parts catalogue.
Installation and technical recommendations
Before purchasing or installing the hose, check the following:
1. Part number verification: confirm that 2202932518 is the correct reference for the specific compressor.
2. Overall length: verify the nominal 890 mm dimension and the manufacturer's measurement method.
3. Fitting geometry: check the SV60 and F90 terminal configuration, including orientation and sealing interfaces.
4. Operating pressure and temperature: ensure that the hose is rated for the actual operating conditions.
5. Fluid compatibility: verify suitability for the fluid carried by the circuit, whether compressed air, oil or another medium.
6. Installation condition: prevent twisting, excessive bending, crushing, abrasion and undue loads on the fittings.
Installation must be carried out by qualified personnel after the machine has been stopped, isolated from energy sources and fully depressurized in accordance with the manufacturer's safety procedures.

Technical limitation: the maximum working pressure, temperature range, hose material, internal diameter and detailed fitting dimensions cannot be reliably established from the part designation alone. Consult the official technical documentation before specifying these values or using the hose in service.

All product specifications in this catalog are based on information taken from official sources, including the official manufacturer’s CECCATO websites, which we consider as reliable. Unfortunately, even the official documents may contain mistakes and printing errors – we are not able to confirm that all of these data are precise and represent the facts. Most of the manufacturers reserve the right to change the product characteristics or complement without notice.We strongly recommend using the published information as a basic information subject to CECCATO brand review. Please refine the important parameters by the selling assistant when making a purchase. All content included in this catalog is the intellectual property of www.bricoutensili.com. Any publication or copying (full or partial) without a reference to the source page is prohibited.