Atlas Copco Air Filter for Oil-Injected Screw Compressors – Part No. 2200640551

Product Description:

The Air Filter 2200640551 is custom-engineered to protect oil-injected rotary screw air compressors from airborne dust, particulate matter, and debris. Clean air intake is the primary defense line against premature rotor and bearing wear, as well as premature contamination and degradation of the compressor lubricant.

Manufactured to high OEM standards by Atlas Copco, this air filter strikes the perfect balance between high dust-holding capacity and low restriction (minimal pressure drop $\Delta P$). This allows your air compressor to operate at peak volumetric efficiency while minimizing power consumption.

- Technical & Maintenance Recommendations

- Replacement Schedule: Replace the intake air filter during routine maintenance service (typically every 2,000 operating hours or annually). In harsh or heavy-dust operating environments, shorten the replacement interval accordingly.
- Avoid Compressed Air Cleaning: Never attempt to blow out or clean a dirty paper filter element with compressed air. Doing so damages the microscopic fibers, creating bypass channels that allow abrasive particles directly into the screw element.
- Check the Intake Valve: During replacement, inspect the intake unloader valve housing, rubber boots, and clamps for cracks, wear, or debris build-up to ensure a tight seal.
- Proper Sealing: Always verify that the filter element sits flush and locks securely inside the housing to prevent unfiltered ambient air from bypassing the filter media.

- Technical Specifications & Sales Info

- Weight: 450 g
- Width: 170 mm
- Height: 160 mm
- Length: 170 mm
- Country of Origin: Italy (IT)
- Key Features: Atlas Copco's Air Filter strikes a balance between highly efficient filtration and helps to protect the inlet path for longer component life and consistent output.

All product specifications in this catalog are based on information taken from official sources, including the official manufacturer’s CECCATO websites, which we consider as reliable. Unfortunately, even the official documents may contain mistakes and printing errors – we are not able to confirm that all of these data are precise and represent the facts. Most of the manufacturers reserve the right to change the product characteristics or complement without notice. We strongly recommend using the published information as a basic information subject to CECCATO brand review. Please refine the important parameters by the selling assistant when making a purchase. All content included in this catalog is the intellectual property of www.bricoutensili.com. Any publication or copying (full or partial) without a reference to the source page is prohibited.