Oil Separator 6221372550 for Oil-Injected Screw Compressors

Oil Separator 6221372550 for Oil-Injected Screw Compressors

Product Description:

The GA5-11C Oil Separator Filter Kit is specially engineered for scheduled maintenance on oil-injected rotary screw air compressors manufactured in 2002. This kit plays a critical role in system efficiency by removing aerosolized oil particles and micro-droplets from compressed air, returning clean lubricant back into the cooling/lubrication circuit and delivering high-quality air downstream.

Operating with a clogged or degraded separator filter leads to excessive pressure drop ($\Delta P$), higher electrical consumption, and risk of oil carry-over into your compressed air piping.

- Technical & Maintenance Recommendations

- Replacement Interval: Replace the separator kit during routine service (typically every 2,000–4,000 operating hours or annually, depending on operating conditions and lubricant type).
- Static Grounding Check: Always ensure the static conductive staples/pins integrated into the separator gasket are correctly installed and making metal-to-metal contact with the vessel. This dissipates static electricity build-up, preventing internal sparks and potential fire hazards.
- Inspect the Scavenge Line: Clean or replace the scavenge line tube, orifice, and check valve when replacing the filter kit. A blocked scavenge line prevents collected oil from returning to the sump, causing severe oil carry-over into the air line.
- Complete Service Companion: Always replace the compressor lubricant, oil filter, and air inlet filter simultaneously to ensure contaminants do not prematurely plug the new separator element.

- Technical Specifications & Sales Info

- Weight: 1.66 kg
- Width: 210 mm
- Height: 120 mm
- Length: 220 mm
- Country of Origin: Germany (DE)
- Further Sales Information: G2-7 units: For serial numbers from ITJ510524 order 1837 0063 48 - See ECB CAII 0351.

All product specifications in this catalog are based on information taken from official sources, including the official manufacturer’s CECCATO websites, which we consider as reliable. Unfortunately, even the official documents may contain mistakes and printing errors – we are not able to confirm that all of these data are precise and represent the facts. Most of the manufacturers reserve the right to change the product characteristics or complement without notice. We strongly recommend using the published information as a basic information subject to CECCATO brand review. Please refine the important parameters by the selling assistant when making a purchase. All content included in this catalog is the intellectual property of www.bricoutensili.com. Any publication or copying (full or partial) without a reference to the source page is prohibited.