RYOBI RAC110 - Replacement Trimmer Line (1.2mm x 15m)
Features
Contents: Bulk trimmer line (does not include spool, spring, or cap).
Compatibility: Ideal for Ryobi models RLT3025F, RLT3025S, RLT3023, and RLT3123.
Usage: Suitable for manual winding onto existing empty spools.
Technical Specifications
Line Diameter: 1.2mm (approx. 0.047")
Total Length: 15 meters (approx. 49 ft)
- Product Code: 5132002637
- EAN Code: 4892210818546
Manual Winding Instructions
If you prefer to refill your original spool rather than replace it, follow these steps:
Cutting: Cut the required length of line (usually about 10–16 feet, depending on the spool's capacity).
Hooking: Insert the end (or the center point for dual-line spools) into the designated anchor slot on the empty spool.
Winding: Wind the line following the direction of the arrows indicated on the spool. Maintain constant tension to ensure the line does not overlap unevenly or tangle.
Securing: Snap the ends of the line into the holding notches on the spool before reassembling it into the trimmer head.
Please Note: This product consists of bulk line only. This is the most cost-effective solution if your plastic spool is still in good condition and you simply want to refill it.
All product specifications in this catalog are based on information taken from official sources, including the official manufacturer’s RYOBI websites, which we consider as reliable.Unfortunately, even the official documents may contain mistakes and printing errors – we are not able to confirm that all of these data are precise and represent the facts. Most of the manufacturers reserve the right to change the product characteristics or complement without notice.We strongly recommend using the published information as a basic information subject to RYOBI brand review. Please refine the important parameters by the selling assistant when making a purchase. All content included in this catalog is the intellectual property of www.bricoutensili.com. Any publication or copying (full or partial) without a reference to the source page is prohibited.
Italiano
