Insulation Fixative Solvent 5 lt 

INSULATION-A SOLVENT FIXATIVE, colorless, high penetration, consolidates the media,
increases the adhesion of subsequent layers, homogenized absorption.
Consolidate internal and external media, especially for old walls, crumbling, dusty.
It penetrates deep, not allowing excellent breathability film.
Resistant to mold and bacteria. For high-quality paint systems.
Is applied on plaster, brick, drywall, concrete and other porous surfaces.
Features
Composition: consolidating fixative insulator-based modified acrylic resins PLIOLITE Goodyear, solubilized in
organic solvents and additives to facilitate the application
Specific Gravity: 0.8 ± 0.05 kg / liter at 20 ° C.
pH: 8.5 +9.5 packaging
Colour: transparent
Yield: 8-10 m² / liter vary considerably depending on the roughness and the absorption of the support
Drying at 20 ° C:
to the touch 30 minutes, 8 hours in depth; over after 24 hours with solvent-based finishes, after 48
hours with water-based finishes
These times are influenced by temperature and ventilation during drying.
READY
Do not apply over surfaces heated by the sun, ice on surfaces, with the risk of rain during
drying. Apply with a relative humidity below 85% with a minimum of 4 degrees above the point
dew.
Apply by brush, roller or spray, one or more hands sufficient to impregnate the support
- Packaging: 5 l