Liquid Steel Bostik

Bostik liquid steel and an epoxy adhesive paste / metal two-component metallic color.
It has high mechanical strength, chemical (and is therefore insoluble in water, oil, alcohol, acids and most solvents) and temperature (up to 100 ° C).
The curing time is about 5 min. (And so quickly, but allows you to reposition the party in the event of an error) and the welded piece can already be handled after 10-15 min.
It contains no solvents and hardening does not withdraw.
Once cured and tooling, sanded, painted.

Application:
- Weld together metal parts and glass, ceramic, stone, wood and most plastics (except polyethylene, polypropylene and PTFE).
- Grouting holes and cracks on metal surfaces (eg rust holes) and reconstruction of small details.

- How to use:
- Remove all traces of dirt and grease from the object to be repaired.
- Mix Part A and Part B in equal amounts with extreme caution.
- Spread the mixture onto the part to be glued together and within 5 min.
- Keep in touch sides for at least 5-10 min.
- Sand or tooling 24 hours after application.

Technical data:
- Commodities:
- Component A: epoxy resin, fillers and pigments.
- Component B: polimercaptano, loaded.
- Specific gravity:
- Component A: 1.30 g/cm3
- Component B: 1.60 g/cm3
- Mixing ratio: 1: 1 A + B by weight.
- Time: 4-6 min.
- Yield: 150-200 g/m2 about to be applied on each surface.
- Storage: Store in a cool place away from children.
- Shelf life: Stable for one year (if stored properly).
- Notes Hazard: A component-irritating to skin and eyes.
- D2366 - blister 30ml
- EAN 8000053131258