- New
Product Description:
KIT 7.5-10HP C43I 2000H/1YR
Original FIAC 2000-Hour Maintenance Kit (Part Number: 2901370006).
This kit is specifically designed for the routine maintenance of FIAC New Silver fixed-speed screw compressors, 7.5HP (5.5 kW) with a 10 Bar operating pressure. The kit includes all the components necessary to ensure the reliability, longevity, and energy efficiency of the machine, preventing costly mechanical failures.
Product Description:
KIT 7.5-10HP C43I 2000H/1YR
Original FIAC 2000-Hour Maintenance Kit (Part Number: 2901370006).
This kit is specifically designed for the routine maintenance of FIAC New Silver fixed-speed screw compressors, 7.5HP (5.5 kW) with a 10 Bar operating pressure. The kit includes all the components necessary to ensure the reliability, longevity, and energy efficiency of the machine, preventing costly mechanical failures.
Product Description:
KIT 7.5-10HP C43I 2000H/1YR
Original FIAC 2000-Hour Maintenance Kit (Part Number: 2901370006).
This kit is specifically designed for the routine maintenance of FIAC New Silver fixed-speed screw compressors, 7.5HP (5.5 kW) with a 10 Bar operating pressure. The kit includes all the components necessary to ensure the reliability, longevity, and energy efficiency of the machine, preventing costly mechanical failures.
Typical kit contents:
All product specifications in this catalog are based on information taken from official sources, including the official manufacturer’s FIAC websites, which we consider as reliable. Unfortunately, even the official documents may contain mistakes and printing errors – we are not able to confirm that all of these data are precise and represent the facts. Most of the manufacturers reserve the right to change the product characteristics or complement without notice. We strongly recommend using the published information as a basic information subject to FIAC brand review. Please refine the important parameters by the selling assistant when making a purchase. All content included in this catalog is the intellectual property of www.bricoutensili.com. Any publication or copying (full or partial) without a reference to the source page is prohibited.
Informazioni sulle spedizioni e consegne saranno disponibili a breve.
Replacement Instructions / Maintenance Instructions
Warning
Always perform maintenance with the compressor switched off, disconnected from the power supply, and with no residual pressure in the tank/circuit.
Safety: Cut off the power supply and fully discharge all internal pressure.
Oil Filter: Place a drain pan under the filter, unscrew the used filter, and lubricate the gasket of the new filter with clean oil before screwing it into place.
Air Filter: Open the filter housing, remove the dirty filter element, and insert the new one, ensuring it is properly sealed.
Separator: Remove the separator tank cover, extract the separator filter (usually a spin-on type or internal cartridge), replace it, and refit the new gaskets provided in the kit.
Closing: Correctly tighten all components, clean up any traces of oil, and top up the lubricant oil level if necessary. Run an off-load test cycle.